ns-2, ns-3, Omnet++ related Articles for Research Scholars

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Installing FLoRa under OMNet++ for doing IoT ADR Simulation.

FLoRa – Framework for LoRa FLoRa (Framework for LoRa) is a simulation framework developed by Mariusz Slabicki, Gopika Premsankar for carrying out end-to-end simulations for LoRa networks. It is based […]
Omnet++, Research, Restricted Articles
Installing OMNeT++ 6 on a 64-bit Debian 10 Under Chroot-Jail

This article explains the way of installing OMNeT++ 6 on a 64-bit Debian 10 Chroot-Jail which was set up under a Debian 11 Native installation. (A Debian 10 chroot jail […]
Omnet++, Restricted Articles
Installing 5G-Lena 3GPP-NR module on ns-3.36 under Debian OS

This article explains the way of installing 5G-Lena 3GPP-NR module on ns-3.36 under Debian OS. This is nothing but a learning log of 5G-Lena 3GPP-NR module installation on ns-3.36 . […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing SUMO, OmNet++ and Veins for doing VANET Research.

This article explains the installation of SUMO, OmNet++ and Veins for doing VANET Research. We can do a VANET research in an integrated manner using these three pieces of software […]
Omnet++, Research, Unrestricted Articles
Installation of Cognitive Radio Extension for ns-3 (CRE-NS3)

Cognitive Radio “Cognitive Radio is an intelligent wireless communication system. Each radio is contextually aware of the surrounding environment, is able to dynamically adjust its radio parameters and switch channels […]
ns-3, ns-3 Installation, Research, Restricted Articles
Cognitive Radio Cognitive Network(CRCN) Simulator for ns-2.

Cognitive Radio “A cognitive radio (CR) is a radio that can be programmed and configured dynamically to use the best wireless channels in its vicinity to avoid user interference and […]
Experiments on Ns2, ns-2, Ns-2 Installation, Patching Ns-2, Research, Restricted Articles
Generating Genuine, Quality Tables & Graphs for Publication.

Based on my experience and interactions with lots of intelligent scholars from different parts of the world, I can definitely say that a Quality Table of results and a good […]
Articles for Research Scholars, ns-2, ns-3, Omnet++, Research, Restricted Articles
Greedy Perimeter Stateless Routing (GPSR) Extension for ns-3

Greedy Perimeter Stateless Routing (GPSR). In [2], the authors present Greedy Perimeter Stateless Routing. “It is a novel routing protocol for wireless datagram networks that uses the positions of routers and […]
ns-3, ns-3 Installation, Research, Unrestricted Articles
Installing Castalia on OmNet++ for WSN and BAN Simulations.

Body Sensor Network A body area network (BAN), also referred to as a wireless body area network (WBAN) or a body sensor network (BSN) or a medical body area network […]
Omnet++, Research, Restricted Articles
Possibility of Simulating 6G THz Terasim along with ms-van3t

Sixth-Generation Wireless (6G) 6G is the successor to 5G cellular technology. 6G networks will be able to use higher frequencies than 5G networks and provide substantially higher capacity and much […]
ns-3, ns-3 Installation, Research, Unrestricted Articles
Secrets of Using Fuzzy Logic in ns-2 using Fyzzylite Library

Why Software like Matlab should not be used for Designing and Testing a Network Protocol? The choice of using Matlab or similar tools for a Network Protocol-related research is not […]
Articles for Research Scholars, Experiments on Ns2, ns-2, Ns-2 Installation, Research, Restricted Articles
Simulating Manhattan Grid Mobility Model for VANET with SUMO

The Manhattan mobility model is an urban-type of mobility model for vehicular ad-hoc networks (VANET) and it uses a “grid road topology[6]. SUMO has different tools for creating and customizing road […]
Omnet++, Research, Restricted Articles
Simulation of 5G Networks under Omnet++ and Simu5G simulator

Simu5G is the evolution of the popular SimuLTE 4G network simulator that incorporates 5G New Radio access[1]. It is based on the OMNeT++ framework, written in C++ and is fully customizable with […]
Omnet++, Research, Unrestricted Articles
Installing the FlyNetSim Integrated UAV-Network Simulator under “chroot”

Generally, we can do FANET/UAV/DRONE simulations as mentioned in the following article : Simulation of UAV based Search and Rescue Scenario with ns-3 FlyNetSim is somewhat different from the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles
Installing Aquasim & Aqua3D on an old Linux under VirtualBox

Some of the old ns-2 versions and even some very old ns-3 versions can only be installed on an older Linux variant because of the gcc and gcc-lib compatibility issues. […]
3D Network Simulations, Experiments on Ns2, ns-2, Ns-2 Installation, Patching Ns-2, Research, Restricted Articles