ns-3 | ns-2, ns-3 Project and Research Help Forum

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Installing OMNet++ IDE Under new Windows11 Version Using WSL

The Windows Subsystem for Linux (WSL): The Windows Subsystem for Linux (WSL) lets developers run a GNU/Linux environment — including most command-line tools, utilities, and applications — directly on Windows, […]
3D Network Simulations, Articles for Beginners, ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns-3 and NetAnim Under New Windows 11 Using WSL2

The Windows Subsystem for Linux (WSL): The Windows Subsystem for Linux (WSL) lets developers run a GNU/Linux environment — including most command-line tools, utilities, and applications — directly on Windows, […]
3D Network Simulations, Articles for Beginners, ns-3, ns-3 Installation, Research, Unrestricted Articles
Installing WSL2 Under Windows 11 and Running GUI Linux Apps.

Even though the latest Linux distributions are user-friendly, students and scholars tend to use Windows since they are only familiar with Windows operating system and will find it difficult to […]
3D Network Simulations, Articles for Beginners, Experiments on Ns2, ns-2, Ns-2 Installation, ns-3, ns-3 Installation, Omnet++, Unrestricted Articles
Installing 5G-Lena 3GPP-NR module on ns-3.36 under Debian OS

This article explains the way of installing 5G-Lena 3GPP-NR module on ns-3.36 under Debian OS. This is nothing but a learning log of 5G-Lena 3GPP-NR module installation on ns-3.36 . […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installation of Cognitive Radio Extension for ns-3 (CRE-NS3)

Cognitive Radio “Cognitive Radio is an intelligent wireless communication system. Each radio is contextually aware of the surrounding environment, is able to dynamically adjust its radio parameters and switch channels […]
ns-3, ns-3 Installation, Research, Restricted Articles
Generating Genuine, Quality Tables & Graphs for Publication.

Based on my experience and interactions with lots of intelligent scholars from different parts of the world, I can definitely say that a Quality Table of results and a good […]
Articles for Research Scholars, ns-2, ns-3, Omnet++, Research, Restricted Articles
Greedy Perimeter Stateless Routing (GPSR) Extension for ns-3

Greedy Perimeter Stateless Routing (GPSR). In [2], the authors present Greedy Perimeter Stateless Routing. “It is a novel routing protocol for wireless datagram networks that uses the positions of routers and […]
ns-3, ns-3 Installation, Research, Unrestricted Articles
Possibility of Simulating 6G THz Terasim along with ms-van3t

Sixth-Generation Wireless (6G) 6G is the successor to 5G cellular technology. 6G networks will be able to use higher frequencies than 5G networks and provide substantially higher capacity and much […]
ns-3, ns-3 Installation, Research, Unrestricted Articles
Installing the FlyNetSim Integrated UAV-Network Simulator under “chroot”

Generally, we can do FANET/UAV/DRONE simulations as mentioned in the following article : Simulation of UAV based Search and Rescue Scenario with ns-3 FlyNetSim is somewhat different from the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles
Installing an old Linux under VirtualBox and using Shared Folders.

Some of the old ns-2 versions and even some very old ns-3 versions can only be installed on an older Linux variant because of the gcc and gcc-lib compatibility issues. […]
Experiments on Ns2, General Ns2 related issues, ns-2, Ns-2 Installation, ns-3, ns-3 Installation, Patching Ns-2, Research, Restricted Articles
Secrets of Using Fuzzy Logic in ns-3 using Fyzzylite Library

In fact, using ‘waf’ based ns-3 compile, we can easily add an external library and use it in our ns-3 simulations. Doing the same under CMake is a little bit […]
Articles for Research Scholars, ns-3, ns-3 Installation, Research, Restricted Articles
Doing Software-Defined Networking(SDN) Simulation under ns-3

The default ns-3 will contain OpenFlow extension module. But to use that module, we have to install a suitable version of OpenFlow switch library (as an external library) and have […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing OFSwitch13 and doing SDN Simulation under ns-3

Generally, the procedures that you find on the internet for installing OpenFlow 1.3 support module (OFSwitch13) may fail on latest Linux Operating systems because of the new conventions and standards […]
ns-3, ns-3 Installation, Research, Restricted Articles
Configuring Visual Studio Code for ns-3 Under chroot Jail

Visual Studio Code (VS Code) is an open-source source-code editor made by Microsoft for Windows, Linux and macOS[1]. It has the support for debugging, syntax highlighting, intelligent code completion, snippets, […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns-3-dev Under chroot Jail and Compile with CMake

In a previous article, we explained the way of installing ns-3.35 under chroot jail. But installing ns-3-dev, in the same way, is not possible under chroot jail because, ns-3-dev configure […]
ns-3, ns-3 Installation, Research, Restricted Articles