Restricted Articles | ns-2, ns-3 Project and Research Help Forum

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing mmWave ns-3 Extension Module to Simulate 5G Wireless Systems

Millimetre-wave(mmWave) System: Millimetre-wave (mmWave) communication systems have attracted significant interest regarding meeting the capacity requirements of the future 5G network[3]. MmWave spectrum is between 30 GHz and 300 GHz. Theoretically, […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulation of Multi-Tire UAV/AANET/FANET Topology Using Gauss-Markov 3D Mobility Model Under ns-3

Multi-Tier 3D FANET simulation using ‘GaussMarkovMobilityModel’ By using the ‘GaussMarkovMobilityModel’ and ‘RandomBoxPositionAllocator’, which are readily available under ns-3, we can simulate a Multi-Tier FANET. This 3-dimensional Gauss-Markov mobility model available […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Using Gauss-Markov 3D Mobility Model Under ns-3 for Simulating Unmanned Aerial Vehicle (UAV), Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET)

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulating And Visualizing 3D Mobile Underwater Sensor Network (UWSN) Under ns-3

Underwater acoustic communication [1] : Underwater acoustic communication is a technique of sending and receiving messages below water. There are several ways of employing such communication but the most common […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulating And Visualizing 3D Flying Ad-hoc Network (FANET) Under Omnet++

The Flying Ad-hoc Network (FANET) FANET has emerged as an alternative access technology for regions that have no fixed infrastructure or are hard to reach. It is a group of […]
Omnet++, Research, Restricted Articles
Simulating and Visualizing 3D Underwater Wireless Sensor Network (UWSN) Under Omnet++

Underwater Wireless Sensor Networks (UWSN) UWSNs is usually made up of autonomous vehicles and individual sensor nodes that implement monitoring operations as well as storing and forwarding operations to route […]
Omnet++, Research, Restricted Articles
Simulating And Visualizing 3D Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET) Under ns-3

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Omnet++ in Debian 9 chroot Jail Under Debian 11 Host OS

Problems in installing Omnet++ under Native and Virtual Hardware/OS: The most common issues that we may face under native hardware a re: The Unix/Linux variant operating system(host OS) that is […]
Research, Restricted Articles
Installing NetSimulyzer 3D Visualization Tool Under Linux Virtual Guest Operating System Environment

NetSimulyzer 3D Visualization Tool: The NetSimulyzer 3D visualization tool can be used to play/animate/visualize ns-3 network scenarios for better understanding, presenting and debugging them. While trying to install the NetSimulyzer […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Faking ‘qt5-default’ package on Debian 11 for Installing NetSimulyzer 3D Visualization Tool

NetSimulyzer 3D Visualization Tool: The NetSimulyzer 3D visualization tool can be used to play/animate/visualize ns-3 network scenarios for better understanding, presenting and debugging them. While trying to install the NetSimulyzer […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Aqua-3D Visualization Tool In Ubuntu 16.04 LTS and Visualizing Aqua-Sim Underwater Network Simulations

Aqua3D is being developed as a part of the Aqua-Sim network simulator project. Basically, Aqua-Sim is NS-2 based network simulator that can able to simulate underwater acoustic networks. Aqua-Sim is […]
ns-2, Research, Restricted Articles
Installing Aqua-Sim in Ubuntu 16.04 LTS – Underwater Sensor Network Simulation with ns-2

Aqua-Sim Aqua-Sim is an ns-2 based simulator for simulating underwater sensor networks. It can simulate acoustic signal attenuation, packet collisions, routing in underwater sensor networks. According to its manual, it […]
3D Network Simulations, ns-2, Research, Restricted Articles
Implementation of Reliable and Efficient Reporting Mechanism with Randomized Energy-Conservation Protocol in Wireless Sensor Networks

Introduction Energy efficiency is one of the major concerns in wireless sensor networks, since it impacts the network lifetime. In this paper, we investigate the relationship between sensor network performance, […]
Restricted Articles, Students Contributed ns-2 Projects