UAV

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Installing NetSimulyzer for Visualising IoD_Sim FANET in 3D.

IoD_Sim IoD_Sim is an open source and system-level simulator for the IoD (Internet of Drones). It is developed on top of the well-known ns-3 (Network Simulator 3), it implements the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Internet of Drones Simulator (IoD_Sim) in Debian

In [1], the authors abstractly explain IoD and their IoD_Sim as follows: “The Internet of Drones (IoD) is a networking architecture that stems from the interplay between Unmanned Aerial Vehicles […]
ns-3, ns-3 Installation, Research, Restricted Articles
Using 3D obstacle-compliant 3D-mobility models under ns-3.37

Mobility Models for UAV To facilitate 3D for testing UAV systems, [1] presents different mobility models for the emulation of the movement of a UAV. The GitHub repository[2] contains the […]
ns-3, ns-3 Installation, Research, Restricted Articles
Visualizing ns-3 FANET 3D Paparazzi Mobility Model Scenario Using NetSimylyzer

Paparazzi Mobility Model It is a mobility model to simulate the movement of autonomous vehicles, such as drones or UAVs (unmanned aerial vehicles), in a virtual environment. It allows users […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Using The Paparazzi Mobility Model in ns-3 FANET 3D Scenario

Paparazzi Mobility Model It is a mobility model to simulate the movement of autonomous vehicles, such as drones or UAVs (unmanned aerial vehicles), in a virtual environment. It allows users […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Greedy Perimeter Stateless Routing (GPSR) Extension for ns-3

Greedy Perimeter Stateless Routing (GPSR). In [2], the authors present Greedy Perimeter Stateless Routing. “It is a novel routing protocol for wireless datagram networks that uses the positions of routers and […]
ns-3, ns-3 Installation, Research, Unrestricted Articles
Testing the New Semi Random Circular Mobility Model of ns-3.

SRCM – Semi Random Circular Mobility Model of ns-3 While trying to raise my own merge request for my Simple Circle Mobility Model, on GitLab, I saw another merge request […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Trace Analysis of TCP Flows Under ns-3 MANET/ FANET/ VANET/ WSN Scenario

Simulation of Simple 3D FANET with TCP flows under ns-3 In this example, we simulate TCP flows in a FANET scenario, but the same idea can be implemented on a […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
An ns-3 Simulation to Plot Circle Mobility on Graph

In a previous article, “Implementation of Circle Mobility Mdel for ns-3 and Visualizing it in 3D“, I showed the creation of a new mobility model class implementation for simulating circular […]
3D Network Simulations, ns-3, Research, Restricted Articles
Real-time Visualization of TCP cwnd, rtt, rto and ssthreshold Dynamics of a 3D FANET Scenario

Simulation of Simple 3D FANET with TCP flows under ns-3 In this example, we simulate TCP flows in a FANET scenario, but the same idea can be implemented on a […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
ns-3 VANET Simulation – 3D Visualization of 2D Gridway Mobility using NetSimulyzer

VANET Simulation and Visualization under ns-3 In fact, with default installation itself, ns-3 does not have rich support for simulating VANET. The reason is there is no fully functional DSRC […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles
Simulation of Multi-Tire UAV/AANET/FANET Topology Using Gauss-Markov 3D Mobility Model Under ns-3

Multi-Tier 3D FANET simulation using ‘GaussMarkovMobilityModel’ By using the ‘GaussMarkovMobilityModel’ and ‘RandomBoxPositionAllocator’, which are readily available under ns-3, we can simulate a Multi-Tier FANET. This 3-dimensional Gauss-Markov mobility model available […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Using Gauss-Markov 3D Mobility Model Under ns-3 for Simulating Unmanned Aerial Vehicle (UAV), Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET)

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles